YMC-Pack Diol-NP

Different Separation Characteristics from Bare Silica Gel

YMC-Pack Diol-NP shows typical normal-phase retention behavior when used with low-polarity mobile phases due to hydroxyl groups on the surface of the stationary phase acting as polar groups.  Diol-NP is as widely applicable to normal-phase separations as standard silica gel, but is useful in cases where separation optimization is difficult to achieve with silica.  In addition, it can also be used in HILIC-mode with organic/water mobile phases.

Specifications

YMC-Pack Diol-NP: Features & Benefits

Specifications
Base Material: Silica
Stationary Phase: Dihydroxypropyl (USP L20)
Particle Size: 5µm
Pore Size: 60Å, 120Å
Bonding: Monomeric
pH Range: 2-7.5

A Normal-Phase Alternative to Silica

YMC-Pack Diol-NP stationary phase is a versatile alternative to silica for normal-phase separations.  The bonded layer’s hydroxyl groups provide good selectivity without excessive retention, since hydrogen bonding with the Diol-NP layer is not as strong as with silanols on a bare silica surface.  Diol-NP columns also provide much better reproducibility when compared to bare silica material.

  • Improved peak shape versus bare silica
  • Good selectivity without excessive retention
  • High product recovery
  • Excellent bonded-phase reproducibility
  • Long column lifetime
  • High loading with prep material

Applications

Applications

app-1

More Applications

Product List

Product Table

Please select the desired options to view a list of products.

5µm

60Å

3mm & 4.6mm ID

Part Number Column Length (mm) Column I.D. (mm) Particle Size Pore Size Price Quantity
DN06S05-1503WT 150 3.0 5µm 60Å $815.00
DN06S05-1046WT 100 4.6 5µm 60Å $758.00
DN06S05-1546WT 150 4.6 5µm 60Å $843.00
DN06S05-2546WT 250 4.6 5µm 60Å $969.00

120Å

2mm & 3mm ID

Part Number Column Length (mm) Column I.D. (mm) Particle Size Pore Size Price Quantity
DN12S05-0502WT 50 2.0 5µm 120Å $431.00
DN12S05-1502WT 150 2.0 5µm 120Å $724.00
DN12S05-0503WT 50 3.0 5µm 120Å $467.00
DN12S05-1503WT 150 3.0 5µm 120Å $815.00

4.0 & 4.6mm ID

Part Number Column Length (mm) Column I.D. (mm) Particle Size Pore Size Price Quantity
DN12S05-0504WT 50 4.0 5µm 120Å $490.00
DN12S05-2504WT 250 4.0 5µm 120Å $969.00
DN12S05-0546WT 50 4.6 5µm 120Å $490.00
DN12S05-1046WT 100 4.6 5µm 120Å $758.00
DN12S05-1546WT 150 4.6 5µm 120Å $843.00
DN12S05-2546WT 250 4.6 5µm 120Å $969.00

*Columns have Quick-Seal endfittings