Products and Services
Liquid Chromatography Components
The HPLC solvent pump
Developed as solvent pumps for preparative chromatography, "K series" are perfect as pumps for preparative HPLC. Dual plungers and a high precision servo motor allow highly accurate pumping with minimized pulsation.
Key features include:
- A wide range of flow rate: the minimum flow rate is precisely 1/1000 of the maximum.
- Gradient operation: Adding on the sub-pump enables standalone gradient operation.
- Recycle compatibility: The dead volume is extremely low so that the recycle characteristics are outstanding.
- Self wash (optional): Cleaning fluid is pumped through the plunger wash ports to provide cleaning of corrosive substances such as salts.
- Explosion proof (optional): Explosion-proof pumps are also available.
- High flow: Flow rates of 3L, 5L and over 10L/min are also available .
K-100
| Standard Specifications | ||
| K-100 | K-300 | |
| Flow rate range | 0.1 - 100mL/min | 0.3 - 300mL/min |
| Pressure limit | 20MPa | 10MPa |
| Pumping mechanism | double plunger, linear cam driven | |
| Pumping method | constant flow | |
| Connection | zirconia, reinforced Teflon PEEK, ruby, sapphire | |
| Power requirement | AC100(AC-200) 50-60 Hz 0.6kW | |
| Dimension | 225(W)x485(D)x205(H) | |
K-1000
| Standard Specifications | ||
| K-500 | K-1000 | |
| Flow rate range | 0.5 - 500mL/min | 1 - 1000mL/min |
| Pressure limit | 10MPa | 10MPa |
| Pumping mechanism | double plunger, linear cam driven | |
| Pumping method | constant flow | |
| Connection | zirconia, reinforced Teflon PEEK, ruby, sapphire | |
| Power requirement | AC100(AC-200) 50-60 Hz 0.6kW | |
| Dimension | 380(W)x550(D)x220(H) | |
Auto-injector
An easy to use automated syringe type injector! A practical alternative to injection using piston pumps.
Key features include:
- Excellent for repetitive stacking of injections.
- Operation is controlled by internal computer.
- 10mL or 5mL syringes can be used.
- Remote control may be conducted from external equipment.
- The syringe does not contact the sample so that cleaning is unnecessary.
| Standard Specifications | ||
| IS-50 | IS-100 | |
| Sample loop | 50mL | 100mL |
| Dimensions of the syringe | 25mL (laminated to be over 25mL) | |
| Syringe drive | stepper-motor | |
| Oscillator | SUS-316 PTFE | |
| Valve pressure limit | 10MPa | |
| Connection tube | 1/16 inch | 1/8 inch |
| Minimum injection mass | syringe 1/10 (or 1mL) | |
Download HPLC pump and auto-injector specifications (pdf, 229kb, Adobe Reader required).