Reversed Phase (ODS)
| Base Material | : | organic/inorganic multilayered hybrid |
| Stationary Phase | : | C18 (as USP L1) |
| Particle size | : | 1.9µm |
| Pore size | : | 120Å |
| Carbon Loading | : | 20% |
| Bonding | : | polymeric type |
| End-capping | : | yes (proprietary) |
| pH Range | : | 1 - 12 |
YMC-Triart C18 is a novel, multi-layered, organic/inorganic hybrid particle synthesized with C18 (L1 USP designation).
Users of Triart are not limited by the usual constraints of pH, temperature, or pressure. Triart is recognized for its mechanical and chemical durability. It is ideal for application at elevated temperature, high pressure, and over a pH range of 1 to 12.
The outstanding mechanical strength of Triart makes it an ideal material for use at the higher pressures typical of uHPLC.
This page describes Triart C18 1.9µm material packed in columns for use in uHPLC. Triart C18 is offered in particle sizes from 1.9µm to 50µm; in a wide range of pre-packed columns as well as bulk media. For a ocmplete description of YMC-Triart C18 characteristics, see our Triart C18 main page.
| Column | : | 50 x 2.0 or 2.1 mm I.D. |
| Eluent | : | 20mMKH2PO4-K2PO4 (pH 6.9)/Acetonitrile (65/35) |
| Flow rate | : | 0.2 mL/min |
| Detection | : | UV at 235 nm |
| Temperature | : | 40°C |
| Column | : | 50 x 2.0 or 2.1 mm I.D. |
| Eluent | : | Acetonitrile/Water (60/40) |
| Detection | : | UV at 254 nm |
| Sample | : | Butylbenzoate |
| Eluent | : | A) Water/Formic acid (100/0.1) B) Acetonitrile/Formic acid (100/0.1) |
| Temperature | : | 70°C |
| Detection | : | UV at 240 nm |
| Sample | : | 1 µl (5 µg/ml) |