Call Now! 888-341-8380

Analytical: YMC-Pack C4 (Butyl)

Separate Mixed-Polarity Samples Quickly

YMC-Pack C4 columns are less hydrophobic than C8 or C18 packings, and generally utilize more aqueous eluents than either of these reversed-phase column types.  When compared to C8 and C18 columns (using the same eluents), C4 stationary phases show significantly shorter retention for non-polar compounds.  Retention of polar compounds, however, is not significantly affected.  Therefore, mixtures with a wide range of component polarity are best analyzed by YMC-Pack C4.  This is due to the C4 bonded phase exhibiting shorter analysis time while still maintaining high resolution when compared to longer-chain bonded chemistries

Specifications

YMC-Pack C4: Features & Benefits

Specifications
Base Material: Silica
Stationary Phase: C4 (USP L26)
Particle Size: 3µm, 5µm
Prep sizes also available
Pore Size: 120Å, 200Å, 300Å
Carbon Load: 7%, 5%, 3%
Bonding: Monomeric
Endcapping: Yes
pH Range: 2-7.5

YMC-Pack C4 (Butyl) columns are available with three pore sizes to accommodate optimum separations of virtually any molecular-weight compound.  The 120Å phase is used extensively with non-polar peptides which are too strongly retained on C8 and C18.  The 200Å and 300Å pore butyl phase columns effectively resolve many classes of proteins and biopolymers.  The wide pore butyl chemistry allows minimal distortion of tertiary conformation for large biomolecules and results in samples that are pure, concentrated, and high in biological activity.

  • Ideally suited for biological separations
  • High-coverage monomeric bonding on perfectly spherical silica supports
  • Fully endcapped
  • Available in 120Å, 200Å, and 300Å pore size packings

Applications

Applications

More Applications >

 

Product List

Product Table

Please select the desired particle size to view a list of products.

3µm

120Å

2mm ID

[vartable id=”20239″]

3mm ID

[vartable id=”20263″]

4.0 & 4.6mm ID

[vartable id=”20283″]

200Å

[vartable id=”20301″]

5µm

120Å

1.0 & 1.5mm ID

[vartable id=”20319″]

2mm & 3mm ID

[vartable id=”20365″]

4.0 & 4.6mm ID

[vartable id=”20462″]

6mm ID

[vartable id=”20413″]

200Å

2mm & 3mm ID

[vartable id=”20508″]

4.0 & 4.6mm ID

[vartable id=”20554″]

300Å

1.0 & 1.5mm ID

[vartable id=”20600″]

2mm & 3mm ID

[vartable id=”20646″]

4.0 & 4.6mm ID

[vartable id=”20692″]

6mm ID

[vartable id=”20738″]

10µm

120Å

4.6mm ID

[vartable id=”20784″]

6mm ID

[vartable id=”20821″]

200Å

4.6mm ID

[vartable id=”20858″]

6mm ID

[vartable id=”20895″]

15µm

[vartable id=”20932″]

    Questions or Concerns?
    Contact Us Today