Different Separation Characteristics from Bare Silica Gel
YMC-Pack Diol-NP shows typical normal-phase retention behavior when used with low-polarity mobile phases due to hydroxyl groups on the surface of the stationary phase acting as polar groups. Diol-NP is as widely applicable to normal-phase separations as standard silica gel, but is useful in cases where separation optimization is difficult to achieve with silica. In addition, it can also be used in HILIC-mode with organic/water mobile phases.
A Normal-Phase Alternative to Silica
YMC-Pack Diol-NP stationary phase is a versatile alternative to silica for normal-phase separations. The bonded layer’s hydroxyl groups provide good selectivity without excessive retention, since hydrogen bonding with the Diol-NP layer is not as strong as with silanols on a bare silica surface. Diol-NP columns also provide much better reproducibility when compared to bare silica material.
Please select the desired options to see a list of products.
60Å
10mm & 20mm ID
30mm ID
120Å
Columns, Guards and Accessories are only available for purchase online in North America or through our distributors.
To purchase consumables outside North America, please find your local distributor.
For YMC systems’ sales outside of North America and Europe, find your regional office contact information here.