Monomerically Bonded, Fully Endcapped C8
C8 is the most commonly used column type following C18. YMC-Pack C8 columns are prepared using exhaustive bonding of a monomeric octylsilane to totally porous and spherical silica gels. The functionalized silica is then treated with an endcapping process which produces a moderate 10% carbon loading on the standard 120Å pore material.
Broad Application Range
C8 columns are well-suited for the separation of many compounds which are too strongly retained on C18 phases or require greater retention than C4. It is the most versatile reversed-phase column and should be considered a first choice when outfitting a new laboratory.
Available in three pore sizes, YMC-Pack C8 columns will separate many classes of compounds including pharmaceuticals, organic chemicals, and biologics. For preparative applications, choose the smallest pore size which provides adequate retention and resolution. This is due to the fact that sample loading is generally proportional to surface area, and small pore stationary phases provide greater surface area.
Please select the desired particle size to view a list of products.
120Å
10mm ID
20mm ID
30mm & 50mm ID
200Å
300Å
30mm ID
50mm ID
70mm ID
100mm ID
No products of this type are available at this time. Please check again later.
Columns, Guards and Accessories are only available for purchase online in North America or through our distributors.
To purchase consumables outside North America, please find your local distributor.
For YMC systems’ sales outside of North America and Europe, find your regional office contact information here.