Useful in Both Normal-Phase and Reversed-Phase Modes
YMC-Pack CN can be used for both normal-phase and reversed-phase analyses due to the medium polarity of the cyanopropyl phase bonded to the silica base particle. It can be used in normal-phase with low-polarity mobile phases such as hexane, or in reversed-phase with highly-polar mobile phases such as methanol and water. YMC-Pack CN can be useful for shortening analysis time in situations where retention is substantial using C18 or C8, or when separation optimization is difficult.
Alternative to Silica
In normal-phase mode, Cyano is a bonded phase that can be used as an alternative to silica. Bonded normal-phase columns have the advantage of faster equilibration and more uniform surface activity compared to bare silica gel. To extend column lifetime, continued switching back and forth between normal- and reversed-phase solvents should be avoided.
120Å
10mm ID
20mm ID
30mm ID
50mm ID
300Å
10mm & 20mm ID
30mm & 50mm ID
No products of this type are available at this time. Please check again later.
Columns, Guards and Accessories are only available for purchase online in North America or through our distributors.
To purchase consumables outside North America, please find your local distributor.
For YMC systems’ sales outside of North America and Europe, find your regional office contact information here.