Call Now! 888-341-8380

YMC-Pack SIL Analytical Guard Columns

High Purity, High Sample Recovery

The high-purity silica found in YMC-Pack SIL columns provides virtually complete sample recovery.  The absence of silica impurities reduces non-specific sample adsorption, which lowers sample recovery and may cause unusual peak shapes.

High Sample Loading, High Mechanical Stability

The totally porous nature of the silica found in YMC-Pack SIL columns provides high sample loading.  With some competitive silicas, the level of porosity would make the particles prone to fracture, resulting in fines and high backpressure.  However, the high chemical purity of YMC silica results in a particle structure exhibiting high mechanical strength.

Guard Cartridges

Analytical Guard Cartridges: Features & Benefits

analytical-guard-columnsYMC’s Guard Column Cartridge Systems for HPLC accept cartridges of 1.0, 2.1, 3.0, or 4.0mm inner diameters – in either 10mm or 20mm lengths.  Cartridges are available with a comprehensive selection including all stationary phase chemistries offered by YMC, ensuring compatibility between the guard column and the analytical column.  Assembly is tool-free, simplifying cartridge replacement.

YMC Guard Column Cartridges require the use of a holder, P/N: XPGCHP1 for 10mm length and P/N: XPGCHP2 for 20mm length.

Product List

Please select the desired particle size to view a list of products.

3µm

[vartable id=”11163″]

5µm

[vartable id=”11174″]

10µm

[vartable id=”11207″]

Holders

Sold Individually

[vartable id=”11216″]

Guard Columns

Analytical Guard Columns: Features & Benefits

YMC’s Guard Columns for HPLC are available in 4.0mm and 5.0mm diameters and come in 10mm lengths.  These guard columns are available with a comprehensive stationary phase selection offered by YMC, ensuring compatibility between the guard column and the analytical column.  Unlike our guard cartridge columns, these guard columns do not require a holder, but do require a small jumper made from either stainless steel or PEEK tubing in order to connect them to the inlet of the analytical column.

Product Table

3µm

No holder required

[vartable id=”11240″]

5µm

No holder required

[vartable id=”11245″]

10µm

No holder required

[vartable id=”11260″]

 

    Questions or Concerns?
    Contact Us Today